Pure Black And Pure Gray; Black Overprint; Image Quality Type - Toshiba E-STUDIO287CS User Manual

Note
• This function is enabled only when your equipment is a
multifunctional digital color system (color MFP).
 Pure Black and Pure Gray
This sets whether printing the black and gray scale contents in
a document using the black toner. This mode can be selected
using the following options.
Option Value Alternate Value
pureblackgray=
0
pureblackgray=
1
pureblackgray=
2
Example: The command to set the pure black and pure gray
mode for the print job is "lp -o pureblackgray=1 <filename>"
Note
• This function is enabled only when your equipment is a
multifunctional digital color system (color MFP).
 Image Quality Type
The Image Quality Type can be selected using the following
options.
Option Value Alternate Value
iqnormal
iqphoto
iqpresen
iqlineart
Example: The command to set the normal quality type for the
print job is "lp -o iqnormal <filename>"
Note
• This function is enabled only when your equipment is a
multifunctional digital color system (color MFP).
Description
Disable the black toner
printing of the black and
gray scale contents.
Enable the black toner
printing of the black
contents.
Enable the black toner
printing of the black and
gray scale contents.
Description
Set the proper image
quality for printing a
general color document.
Set the proper image
quality for printing photos.
Set the proper image
quality for printing a vivid
document.
Set the proper image
quality for printing a
document containing a lot
of characters or line art.
- 75 -
 Halftone
This sets the appropriate processing on halftone images. The
halftone can be selected using the following options.
Option Value Alternate Value
halftone=AUTO
halftone=DETAIL
halftone=
SMOOTH
Example: The command to set the auto halftone for the print
job is "lp -o halftone=AUTO <filename>"
 Black Overprint
This sets whether to print background content that has black
text overlaid on it. If this is enabled, the gap between the text
and the background is minimized and color deviation is
prevented. This mode can be selected using the following
options.
Option Value Alternate Value
blackoverprint=0
blackoverprint=1
Example: The command to set the black overprint mode for the
print job is "lp -o blackoverprint=1 <filename>"
Note
• This function is enabled only when your equipment is a
multifunctional digital color system (color MFP).
 Color Balance
The Color Balance can be selected using the following options.
Option Value Alternate Value
CBC=value
CBM=value
CBY=value
PRINTING FROM UNIX/Linux
Description
Set the proper halftone
depending on the contents
in the document
automatically.
Set the halftone in detail.
Set the halftone smoothly.
Description
Disable the black over
print mode.
Enable the black over print
mode.
Description
Specify the color density
of cyan toner. You can
specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Specify the color density
of magenta toner. You can
specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Specify the color density
of yellow toner. You can
specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
1
2
3
4
5
6
7