Toshiba E-STUDIO287CS User Manual page 22

PRINTING FROM WINDOWS
1
* Images are reproduced more smoothly because
jaggies on the outlines of small text or fine lines such
as graphics are suppressed.
1 However, 600 dpi is recommended for photos
because the tone reproduction level of the image is
higher.
Note that if the resolution is 1200 dpi, it takes longer
than 600 dpi to print out because the capacity of the
data being handled is larger.
Note
2
• When [Photograph] or [Presentation] is selected in
[Image Quality Type] of the [Image Quality] tab, [600 x
1200 dpi] cannot be displayed.
• When [600 x 1200 dpi] is selected, the functions below
are not available.
- Booklet printing
- Automatic change of paper source
- Auto Trapping
3
4) Use Black for All Text
Select this check box to print all text in 100% black except
white texts.
Note
• This function is available only for the printer drivers
below.
- Universal Printer 2
4
- Universal XPS
5) Distinguish Thin Lines
Select this check box to print thin lines clearly.
6) Pure Black
Select this check box to print the black contents using black
toner. When this box is selected, please select how this
function applies in the [Apply to] box.
5
7) Pure Gray
Select this check box to print the gray scale contents using
black toner. When this box is selected, please select how
this function applies in the [Apply to] box.
Note
• The Pure Gray option is not available when [Pure Black]
6
is not enabled.
8) Apply to
Select how the Pure Black and Pure Gray functions apply.
- Auto — Select this to automatically select areas to be
printed using black toner when you want to print the
black (or black and gray scale) contents using its toner.
When this option is selected, appropriate areas are
printed using black toner according to the Image Quality
7
Type option.
- Text — Select this to print only black text or black-and-
gray text using black toner.
- Text & Graphic — Select this to print only black text
and graphics, or black-and-gray text and graphics using
black toner.
- Text, Graphic & Image — Select this to print all black
areas or all black-and-gray areas using black toner.
9) Black Overprint
Select this check box when printing background content
that has black text overlaid on it. If this is enabled, the gap
between the text and the background is minimized and
color deviation is prevented. If this is not enabled, the
background of the black content will not be printed.
Note
• This function is available only for the printer drivers
below.
- Universal Printer 2 (PostScript)
- Universal PS3
10) Apply to
Select how the Black Overprint functions apply.
- Text — Select this to print all the full-color background
and then print black text on the color background.
- Text & Graphic — Select this to print all the full-color
background and then print black text and graphics on
the color background.
Note
• This function is available only for the printer drivers
below.
- Universal Printer 2 (PostScript)
- Universal PS3
11) PostScript Overprint
Select this to enable overprint an object that has been set
so on an application.
Note
• This function is available only for the Universal PS3
printer driver.
12) Auto Trapping
Select this to enable the Auto Trapping option. This is a
technique where the size of objects is modified so that two
colors printed next to each other overlap slightly to avoid
white spaces between them. These white spaces can be
caused by factors such as misregistration.
Note
• This function is available only for the printer drivers
below.
- Universal Printer 2 (PostScript)
- Universal PS3
• This function is available when you print a document
with [Auto] or [Color] selected for the [Color] option in the
[Basic] tab of printer driver.
• When this function is enabled, the printing speed may be
slow.
13) [Restore Defaults]
Click this to restore all the image quality setting details
displayed in the [Basic] tab menu to the original factory
defaults.
- 22 -