Toshiba E-STUDIO287CS User Manual page 17

Hide thumbs Also See for E-STUDIO287CS:
Table of Contents

Advertisement

- Right to Left — Select this to arrange pages
horizontally from the right and printed top to bottom on
one sheet.
- Left to Right by column — Select this to arrange
pages vertically from the top and printed left to right on
one sheet.
- Right to Left by column — Select this to arrange
pages vertically from the top and printed right to left on
one sheet.
Draw Borders Around Pages
Select this check box to print borders around each page.
Memo
• When you select [Booklet] in the [2-Sided Printing] box,
only [2 pages] can be selected.
• For the detailed instructions on how to print with the
[Number of pages per Sheet] setting, see the following
page:
P.47 "Printing several pages on one sheet"
4) Staple
This sets whether a print job is printed with staples.
- Upper Left — Select this to staple the printed
document in the upper left.
Note
• The selectable options vary depending on the paper size
and orientation.
• The "Staple" option is available only when the Finisher is
installed.
• The "Staple" option is not available when the Group
Copies / Magazine sort function is selected.
• Stapling cannot be set when the following paper sizes
are selected in the [Print Paper Size] box in the [Basic]
tab.
- Statement
- A5
- A6
- Postcard
- IndexCard 3x5''
- Custom Paper Size
- Envelope - Com9
- Envelope - Com10
- Envelope - Monarch
- Envelope DL
- Envelope - CHO3
- Envelope - YOU4
• Stapling cannot be set when the following paper types
are selected at the [Paper Type] box in the [Basic] tab.
However, this may differ depending on your model or
whether the Finisher is installed.
- Thick 5
- Special 1
- Special 2
- Special 3
- Special 4
- Special 5
- Special 6
- Envelope 1
- Envelope 2
- Envelope 3
- Envelope 4
Memo
• For detailed instructions on how to print with the [Staple]
setting, see the following page:
P.48 "Stapling"
5) Use Custom Margin
Select this check box to set the margin on the printed
pages. When this box is selected, click [Details] to set the
margins in the [Custom Margin] dialog box.
0.17 inch to 3.94 inches / 4.2 mm to 100 mm (The margin
width cannot be smaller than 0.17 inches / 4.2 mm.)
Note
• If [Booklet] is selected on [2-Sided Printing], this option
will be disabled.
• Enable this function to add the margins if the application
does not support the margin function. When the
application has a margin function, use the application's
function rather than this option.
• This cannot specify the binding margin for Booklet
printing.
6) Poster Print
You can divide a print job onto more than one sheet of
paper, so you can create one large image, such as a
poster, by connecting the divided images. If this option is
enabled, click [Details] and set the Output number of
Sheets.
Note
• The Poster Print option is not available when any of the
Custom Paper Size, Number of pages per sheet, 2-
Sided Printing, Watermark, Overlay Image and Sheet
Insertion options is set.
• The Poster Print option is available only when any of the
sizes below is selected for [Print Paper Size] box on the
[Basic] tab.
A4, LT
Memo
• For detailed instructions on how to print with the Poster
Print option, see the following page:
P.48 "Dividing one image into multiple sheets (Poster
Print)"
- 17 -
PRINTING FROM WINDOWS
1x2
2x2
3x3
1
2
3
4
5
4x4
6
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio347csE-studio407cs

Table of Contents