Toshiba E-STUDIO287CS User Manual page 31

Note
• If you click [Add], a dialog box prompting you to confirm
that the custom paper size differs depending on the
model. Select the custom paper size that your
equipment supports.
3) [Delete]
Click this to clear and restore the default settings of the
selected custom paper size that you selected in the [Paper
Size List]. When you click this, the confirmation dialog box
appears. Click [Yes] to delete the setting.
Note
• To register a custom paper size, either A (Length) or B
(Width) should differ by more than 0.3 inches (7 mm)
from the standard paper size. If not, the created custom
paper size is considered as the standard paper size.
• You cannot create a custom paper size with A (Length)
longer than B (Width). If you want to print such a
document, do so by selecting [landscape] for the
[Orientation].
• There are some precautions when you use paper larger
than the standard sizes. For details, see the following
page:

P.52 "Printing on paper larger than standard sizes"
4) Name
Enter the custom paper size name. You can enter up to 63
characters. This name will be displayed in the [Original
Paper Size] and [Print Paper Size] box on the [Basic] tab.
5) Paper Size
Enter A (Length) and B (Width) to specify the paper size.
Note
• Select values within the range shown on the right of
each.
6) Units
Select the unit for the paper size. The default unit varies
depending on the regional setting in the Windows.
 [Device Settings] tab
The [Device Settings] tab allows you to configure options.
When any optional unit is installed in this equipment, set the
configuration of the machine on this tab. The [Device Settings]
tab can be displayed only from the Printers folder (and not
when displaying the properties from the application's print
dialog box).
Note
• In order to set the [Device Settings] tab, you must access
the printer driver properties from the [Devices and Printers]
folder. For detailed instructions on how to set the [Device
Settings] tab, see the following guide:
 Basic Guide
8
9
1) Model Selection
This sets the model type.
Note
• If you select [Universal], you can narrow down the setup
items of the printer driver to those used commonly in all
of the entire MFP. It is convenient in such cases as when
you are using a printer driver already installed to other
models.
2) Option
This option sets whether the following optional devices are
installed.
Drawers
This sets the installation of drawers according to the
configuration.
- Drawer1 — Select this when only Drawer 1 is installed.
- Drawer 1 & Drawer 3 — Select this when Drawers 1
and 3 are installed.
- Drawer 1 & Drawer 3, 4 — Select this when Drawers 1,
3 and 4 are installed.
- Drawer 1 & Drawer 2 — Select this when Drawers 1
and 2 are installed.
- Drawer 1, 2 & Drawer 3 — Select this when Drawers 1,
2 and 3 are installed.
- Drawer 1, 2 & Drawer 3, 4 — Select this when Drawers
1, 2, 3 and 4 are installed.
Note
• The Large Capacity Feeder is not available for some
countries or regions.
3) Finisher
This sets whether or not the Finisher is installed.
- None — Select this when a Finisher is not installed.
- Inner Finisher (1 Tray) — Select this when a Finisher
is installed.
4) [Drawer Settings]
Click this to set the paper size and paper type of each
drawer. The [Drawer Settings] dialog box appears by
clicking this.
- 31 -
PRINTING FROM WINDOWS
1
2
3
4
5
6
7
1
2
3
4
5
6
7