Image Editing; Trimming / Masking - Toshiba E-STUDIO287CS User Manual

Image Editing

You can select the various editing functions shown below for
scanned images.
Trimming: You can select a certain area of an original and
copy only the selected area.
Masking: You can mask a certain area of an original and
copy only the unmasked area.
Mirror image: You can reverse an image like a mirror.
Negative/Positive reversal: You can reverse the light-and-
dark of an image.

Trimming / Masking

You can select the desired area of an original and copy only
the selected area (trimming). You can also mask the desired
area of an original and copy only the unmasked area
(masking). On both functions you can select up to 4 areas on 1
original. The selected area should be in a rectangle.
Trimming
Memo
• Only standard size originals are applicable.
• Note that the entire image of the selected area may not be
copied if you do not select proper sizes for the original and
copy paper.
Place paper in the drawer(s).
1
When using bypass copying, be sure to set the paper
size.
Press [EDITING] on the EDIT menu.
2
Select [TRIM] or [MASK].
3
4 Place the original on the original glass with
its face up.
Place it with its bottom toward you. Align its top left corner
against that of the original glass so that the original will be
aligned with the original scales.
Masking
Do not place any heavy objects (4 kg (9 lb.) or over)
on the original glass and do not press on it with
force.
Breaking the glass could injure you.
Read the following 4 values to specify the
5
area using the left and top scales on the
original glass.
Note that the marks of the original scales have a 2 mm
(0.08") pitch.
- 103 -
X1: From the top left to the left edge of the selected
area
X2: From the top left to the right edge of the selected
area
Y1: From the top left to the upper edge of the selected
area
Y2: From the top left to the lower edge of the selected
area
EDITING FUNCTIONS
1
2
3
4
5
6
7