Toshiba E-STUDIO287CS User Manual page 23

Setting: [Color Balance] tab
In the [Color Balance] tab of the [Setting] dialog box, you can
specify the following functions. Adjust the density level by
moving the scroll bar, or pressing buttons on the right and left
of the scroll bar.
1
2
3
4
1) All Colors
Adjust the density of all the colors.
2) Each Color
Adjusts the density of each color for printing. You can set
from -4 to 4.
3) Detail
Select this check box to adjust the density of each color
separately in details. When this box is selected, click [Edit]
to display the [Color Balance Detail] dialog box and specify
the density of each color.
— Color Balance Detail
In the [Color Balance Detail] dialog box, you can specify the
density of low, middle, and high colors for each color.
- Low — Change this density to adjust the density of light
color.
- Middle — Change this density to adjust the density of
half color.
- High — Change this density to adjust the density of
deep color.
- Restore Defaults — Click this to restore all the image
quality setting details displayed in the [Color Balance
Detail] dialog box to the original factory defaults.
4) [Restore Defaults]
Click this to restore all the image quality setting details
displayed in the [Color Balance] tab menu to the original
factory defaults.
Setting: [Image Attribute] tab
In the [Image Attribute] tab of the [Setting] dialog box, you can
specify the following functions. Adjust the density level by
moving the scroll bar, or pressing buttons on the right and left
of the scroll bar.
1
2
3
4
5
6
1) Contrast
Adjust the contrast for printing. You can set from -4 (lowest)
to 4 (highest).
2) Brightness
Adjust the brightness for printing. You can set from -4
(darkest) to 4 (lightest).
3) Background Adjustment
Adjust the background adjustment for printing. You can set
from -4 (lightest) to 4 (darkest).
4) Saturation
Adjust the saturation for printing. You can set from -4 (low
clear) to 4 (high clear).
5) Use Sharpness Filter
Select this check box when you use a sharpness filter. You
can set from -4 (softest) to 4 (sharpest).
6) [Restore Defaults]
Click this to restore all the image quality setting details
displayed in the [Image Attribute] tab menu to the original
factory defaults.
Setting: [Advanced] tab
In the [Advanced] tab of the [Setting] dialog box, you can set
the functions below.
The color profile data of this equipment may be updated. If the
SNMP communication between this equipment and your
computer is available, open the [Advanced] tab menu and then
click [Update Now] to obtain the updated color profile data.
- 23 -
PRINTING FROM WINDOWS
1
2
3
4
5
6
7