Led Display Only Displays Part Of The Image; Signal Needs To Scale; No Display In The Second Half Part Of Led Display; Resolution Is Insufficient - RGBlink VSP 168S User Manual

LED Display Only Displays Part of the Image

Signal Needs to Scale

Push [SCALE] button in the processor and knob to adjust the actual screen
size of the screen, including the "V Size", "H Size", ―V Pos‖, ―H Pos‖ and
"Reset", the push the knob to confirm.

No Display in the Second Half Part of LED Display

Resolution is Insufficient

Please make sure the points of the screen width and height, choose the
resolution that bigger than screen width by push button [MENU] and
choose OUTPUT FORMAT, then push the knob to confirm.

Left Screen Appears Two Black Sides

Adjust DE Deviation

Adjust the DVI output and DE migration of the processor, push the [MENU]
button, choose <OUTPUT> and find the corresponding output name, such
as "DVI1 OUT ADJUST", and find "DVI1 DE" again, make an adjustment
for corresponding horizontal and vertical DE, please remember to save to
the corresponding channel after setting up, save to SAVE1 by default.
VSP 168S User Manual 91