Set Led Display Connection - RGBlink VENUS X1 User Manual

3.6 Set LED Display Connection

VENUS X1 can realize three connection as follows connecting the Port D or Port U of one sending
card to LED screen, connecting the both Port D and Port U of one sending card to LED screen,
connecting the Port D and Port U of two sending cards to LED screen (PORT A or PORT B is for
Colorlight, and PORT D or PORT U is for Linsn). The following are the detailed operation steps of
the three connection.
1. Connect the Port D or Port U of One Sending Card to LED Screen
Here we take No.1 sending card, port U1 for example. (Note: No.1 sending card corresponding
to port D1 and port U1, No.2 sending card corresponding to port D2 and port U2.
(1) First, make sure that the device is in normal operation.
(2) Select the input source, for example, DVI.
(3) Connect the cable to Port U1.
(4) Turn the knob, and select <LED MANAGEMENT>:
(5) Push the knob to confirm, turn the knob, select <SENDING CARD TYPE> in <QUICK
CONNECTION> option, push the knob to confirm, turn the knob, select the sending card type,
for example, select Linsn (VENUS X1 supports Linsn and Colorlight sender card, for Nova
sender card, it only support brightness and Gamma adjustment). Shown as follows:
(6) Turn the knob, select <SENDING CARD NO.>, push the knob to confirm. Turn the knob and
select "No.1", push the knob to confirm. Shown as follows:
VENUS X1
SYSTEM
->LED MANAGEMENT
LANGUAGE/语言
FACTORY RESET
->QUICK CONNECTION
ADVANCED
*SENDING CARD TYPE
SENDING CARD NO.
OUTPUT FORMAT
QUICK CONNECTION
SENDING CARD TYPE
->SENDING CARD NO.
OUTPUT FORMAT
QUICK CONNECTION
User Manual
Chapter 3 : Using Your Product
>>
>>
ENG
>>
>>
>>
LINSN
No.2
>>
>>
LINSN
No.1
>>
>>
31