Table of Contents
Advertisement
5. Communication Software Guideline
Software Operation
Aspect Ratio Toolbar
Users can select 4:3, 16:9 or Normal in the pull-down options.
Note
Same as MENU
OUTPUT
RATIO.
Signal Input Toolbar
The white area displays the name of input interface when the mouse is
over the interface picture on the left. The green pane means current
selected interface.
When user selects a dual channel mode, select any channel image, click
on the toolbar interface the ICONS for the channel selection input interface,
green toolbar means the signal is chosen the current interface for channel
1 input interface, the default last single channel chosen interface for
channel 2 input interface, the currently selected channel will be shown on
the right side of the source.
Screen Parameter Toolbar
User can set size and position of the screen simply, mainly applies to LED
display users. After setting screen parameter, the user choice PIP or PBP
operation, display picture can directly shows on corresponding screen.
VSP 168S
User Manual
63
Advertisement
Table of Contents
