Table of Contents
Advertisement
5. Communication Software Guideline
How to Connect Windows Control Program by RS232 Interface
How to Connect Windows Control Program RS232
Interface
Firstly, install the control software in your PC.
Take out the RS 232 cable as following (RS-232, with 9-pin on one end,
RJ11 on the other side). Connect one side of the RJ11 download line to the
RS232 on the video processor VSP 168S, and the other side to be
connected to the serial port on the PC.
Ensure the cable connection is good. Turn on the VSP 168S Video
Processor.
Right click [My Computer] on the home screen of control PC. Enter
[Attribute], Find [Hardware] Option, shown as following.
VSP 168S
User Manual
69
Advertisement
Table of Contents
