How To Set Up The Size And Position Of The Single Image - RGBlink VSP 168S User Manual

6. System Setup and Operation

How to Set up the Size and Position of the Single Image

How to Set up the Size and Position of the Single Image
1. Push [MENU] button to enter the menu items.
2. Turn the knob, choose <OUTPUT>.
3. Push the knob to confirm, turn the knob again, choose <SCALE>.
4. Push the knob to confirm, and enter to the <SCALE> items, turn the knob,
user can adjust the following items by knob or number buttons.
5. If image quality distorts by improper operation, it can be recover by reset.
VSP 168S
>>
>INPUT
OUTPUT >>
INPUT >>
>>
>OUTPUT
OUTPUT ADJUST >>
>SCALE
>H SIZE 1920
V SIZE 1080
>H POS
V POS
>RESET
User Manual
>>
0
0
80