Display Management - RGBlink Q16pro Gen2 1U User Manual

Input Module Info: users can check current input
module name and MCU version
"...." indicates that there are no input modules,as
shown in the right figure.
Output Module Info: users can check current
output module name and MCU version
IP: support auto/manual setting. Show IP Address,
Netmask, Gateway
Fan Control: support auto/manual setting.
Fan Speed: 0-100 adjustable
Notice: To avoid insufficient heat dissipation, the
recommended manual fan speed is not less than
30%.
Factory Setting
Remove EDID: clear the previous EDID parameter
Save IP: no change of IP after reset

3.5.4 Display Management

Display System is for users to set layout of outputs.
Click first and then click
interface.
Q16pro Gen2 1U
to enter the
User Manual 32