RGBlink VSP 168S User Manual page 97

(2) Plug in the power cord, and make sure the device is in normal operation.
(3) Push MENU button, and enter [USB UPGRADE] option, operation steps are:
MENUSYSTEMUSB UPGRADESEL.
(4) Open the USB drive that plug into the computer, and delete the "firmware. Bin" file in
the USB drive, then copy the MCU file "VIDEO.fvb" of VSP168_V1.3 to the USB
drive, program loading is complete after the file has been copied.
(5) Reboot the device, and enter the menu to check if the version is right, factory reset is
completed. Operation steps are: MENUSYSTEMSYSTEM INFOMCU VER.
VSP 168S User Manual 97