6. System Setup and Operations
How to Confirm the Device is in Normal Operation
How to Confirm the Device is in Normal Operation
1. Firstly, make sure plug into the power cord.
2. After power on, the fans running, and scan the button.
3. After scanning, the device is in start state, the LCD module show as
follows:
4. After start, the equipment is default load SAVE1 parameter, CV1 key
light is on, and the device is in normal working.
VSP 168S
AVDSP SERIES VSP168
WAIT INIT DEVICE...
User Manual
RGBLINK
视诚科技
亮彩系列
INPUT:CV1
NO INPUT
75