RGBlink VSP 168S User Manual page 71

5. Communication Software Guideline
How to Connect Windows Control Program by RS232 Interface
Check and tap [Serial], Serial Port, for example, is COM6 which is checked
from device manager. Set VSP 168S Boud Rate to be :115200,
Click[Confirm] after setting.
Click
when there is the prompt green
software, it means the communication is ok , and you can use the software
to control the device now.
Note
If power off during communication, should close
the por
VSP 168S
[open serial], check if [COM] icon is on the bottom right corner,
t , by first, and plug in out of the USB
and do communication.
User Manual
showing on the
71