RGBlink VSP 168S User Manual page 45

4. MENU Orientation
MENU
the image is the graphic content pixel, otherwise, it is the graphic
background pixel. It should combined with "AND/OR" conditions when
judging.
BELOW: In image 2, if the pixel value is lower than the setting value, then
the image is the graphic content pixel, otherwise, it is the graphic
background pixel. It should combined with "AND/OR" conditions when
judging.
AND/OR:
AND: All ―Red, Green, Blue‖ value must meet ABOVE or BELOW
conditions.
OR: Any one of ―Red, Green, Blue‖ value should meet ABOVE or BELOW
conditions.
RED: Red limit, cut-off point condition of ABOVE and BELOW condition in
red channel, the range is 0 ~ 255.
GREEN: Green limit, cut-off point condition of ABOVE and BELOW
condition in green channel, the range is 0 ~ 255.
BLUE: Blue limit, cut-off point condition of ABOVE and BELOW condition in
blue channel, the range is 0 ~ 255.
For details, please refer to the instructions in the manual: How to Realize
the Text Overlay Setting.
DISPLAY MODE:
MODE: Image mode selection, user can choose different output modes
according to their requirement, such as: black screen, live image, freeze
image, flat image, test pattern.
TEST PATTERN: Test pattern setting, turn the knob, there are 1 to 66 kinds
of modes for choose.
Notice: When the input comes from DVI, VGA, or SDI (input format is
progressive only), the TEST PATTERN function will be enable and ready to
operate.
VSP 168S User Manual 45