How To Set Up The Pip - RGBlink VSP 168S User Manual

6. System Setup and Operation

How to Set up the PIP

How to Set up the PIP
Enable the PIP function, the operations are as follows:
1. Push [MENU] button to enter the menu items.
2. Turn the knob, choose <OUTPUT>.
3. Push the knob to confirm, turn the knob again, choose <PIP>.
4. Push the knob to confirm, turn the knob, choose ON and confirm, and
enable the PIP function.
LAYOUT: Can choose PIP layout, the corresponding results are as follows:
PIP L+T
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can realize
the IMAGE A and IMAGE B exchange.
ALPHA: Can set the image transparency, the regulating range is among 0 to 16.
SELECT: Can choose to set the size or position of IMAGE A or IMAGE B
Individually.
VSP 168S
>>
>INPUT
OUTPUT >>
INPUT >>
>>
>OUTPUT
PICTURE >>
>>
>PIP
>PIP
LAYOUT PIP L+T
PBP L+R
User Manual
ON
PBP T+B
79