RGBlink VSP 168S User Manual page 96

C. Software Upgrade
The VSP 168 _V1.3 software upgrade steps are as follows:
1. Communication Firmware Upgrade
Upgrade by copy the file, the name of the file is: WEBSE. Bin, and upgrade steps are as
follows:
(1) Connect the USB interface of VSP168_V1.3 to the computer with a USB cable.
(2) Plug in the power cord, and make sure the device is in normal operation.
(3) Push MENU button, and enter [USB UPGRADE] option, operation steps are:
MENUSYSTEMUSB UPGRADESEL.
(4) Open the USB drive that plug into the computer, and delete the "firmware. Bin" file in
the USB drive, then copy the MCU file "WEBSE. Bin" of VSP168_V1.3 to the USB
drive, program loading is complete after the file has been copied.
(5) Reboot the device, and enter the menu to check if the version is right, factory reset is
completed. Operation steps are: MENUSYSTEMSYSTEM INFOMCU VER.
2. CORE Panel Upgrade
Upgrade by copy the file, the name of the file is: VIDEO.fvb, and upgrade steps are as
follows:
(1) Connect the USB interface of VSP168_V1.3 to the computer with a USB cable.
VSP 168S User Manual 96