2. Hardware Orientation
VSP 168S Back Panel
Power has been already supplied by video processor, no external power
supply needed.
6. USB Control Port of Sending Card
5. DVI Input
Connect to the DVI outputs of video processors.
(This connector does not support hot-plugging).
14. DVI Output
Connect to the monitor or LED screen with DVI interface.
(This connector does not support hot-plugging).
15. DVI +VGA DVI Output
DVI +VGA output via DVI connector connect to the monitor or LED display
with DVI interface. (This DVI connector does not support hot-plugging).
DVI +VGA, VGA output connector can be connected to monitor or projector
which has VGA interface.
Note
Switch and Power
16:Power
AC 85-264V 3.8A 50/60Hz IEC-3 Power Interface.
VSP 168S
Via
adapter, can connect with
DVI-based or VGA-based equipment, and via
DVI to VGA adapter, can output VGA only.
User Manual
29