Split; Save Setup - RGBlink VSP 168S User Manual

Hide thumbs Also See for VSP 168S:

Table of Contents

4. MENU Orientation

ALPHA: Image transparency setting, the regulating range is among 0 to

16.

DEINTERLACE: Force Deinterlace function, can choose ―ON‖ or ―OFF‖.

ON: Force interlace for interlaced signal without effect switching, but with

effects switching for progressive signal.

OFF: No deinterlace, with effect switching.

SPLIT

Choose <SPLIT>, push the knob to confirm, the LCD display show the level

2 menu as following:

SPLIT ON/OFF: Split function, can choose ―ON‖ or ―OFF‖.

H TOTAL: The total width points of LED display that will split.

V TOTAL: The total height points of LED display that will split.

H POS: The horizontal position of the device when do split.

V POS: The vertical position of the device when do split.

H SIZE: The width of the device when do split.

V SIZE: The height of the device when do split.

RESET: If image quality distorts by improper operation, it can be recover by

reset.

SAVE TO: The device provides ten save modes, users can save the

current operations to SAVE1 to SAVE10.

Note

The SAVE button can also achieve this setting.

LOAD FROM: It can call the saved user modes via the call save function.

DELAY CALL: Set delay the output time. When more than one equipment

power on, and the processor is the end equipment in order to improve

question that can't identify the input signal and phenomenon that LED

VSP 168S

User Manual

Table of Contents