3.3.4 Display Management
Display System is for users to set layout of outputs.
Click
to enter layout management interface.
D8 is set to Cross by default, shown as figure in right.
If you need layouts such as H 1/4, V 1/4 or others,
press and hold
to cancel current screen group
and then create a new container.
Container:
Container here means the Display Area, for example it
could be a formed LED screen or an array of LCDs.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
38