Set The Led Display Connection - RGBlink VSP 628PRO Quick Start Manual

Set the LED Display Connection

VSP 628PRO can realize two connection as follows connecting the Port D or Port U of one sending card to LED
screen and connecting the both Port D and Port U of one sending card to LED screen (PORT A or PORT B is for
Colorlight, and PORT D or PORT U is for Linsn). The following are the detailed operation steps of the two
connections.
1. Connect the Port D or Port U of One Sending Card to LED Screen
(1) First, make sure that the device is in normal operation.
(2) Select the input source, for example, DVI.
(3) Connect the cable to Port U.
(4) Turn the rotary knob, and select <Display Setup>:
(5) Push the rotary knob to confirm, turn the rotary knob, select <Card Type> in <Quick Connection> option,
push the rotary knob to confirm, turn the rotary knob, select the sending card type, for example, select Linsn
(VSP 628PRO supports Linsn and Colorlight sender card, for Nova sender card, it only support brightness and
Gamma adjustment). Shown as follows:
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Save
->File 4
Transition
System
Logo
->Display Setup
->Quick Connection
Senior
*Card Type
Brightness
Output Format
Quick Connection
>>
>>
>>
>>
>>
>>
Linsn
>>
>>
>>
11
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn