Split - RGBlink FLEX4ML User Manual

L1~L4 Souce： After layout is selected, input source has be to be selected for each layer.
Input 1~4 is optional source, if there is no module installed, it will show :Index.NO BOARD
Input 5~8 is DUAL DVI ， 6.HDMI 1.4, 7.HDMI 2.0 ，8.DP 1.2 which locate on standard 4K@60 digital
module.
Layer Adjustment ：After layout selection,Width, Height, Horizontal Position, Vertical Position of each
layer shall be set.
Crop：crop the source width and height for each layer.
Save Setting：After layer adjustment and source crop is done, Save Setting to confirm the setting.
Reset Parameter：Cancel the above setting.

3.3.2 Split

Push MENU, rotate the knob and select <Split>
Output Resolution: the same as Output Resolution in Presentation Mode.
FLEX4ML
Width
Height
H POS
V POS
Save
Reset
Output Resolution
Split Mode
Multi-Split
User Manual
1920
1080
0
0
>>
>>
>>
14