Split - RGBlink GX4 User Manual

3.3.6 Split

GX4 can be used in multiple cascade mode to finish split. When do
cascade, connect the signals to the signal distributor first, and then
connect from the outputs of the signal distributor to each input of GX4.
User can also do cascade via HDMI LOOP port.
H TOTAL:set the total horizontal pixels of the LED screen, maximum
65535
V TOTAL:set the total vertical pixels of the LED screen, maximum 65535
H POS: select the total number of horizontal screens
V POS: select the total number of vertical screens
H SIZE:set the horizontal pixels this device will provide, maximum 4096
V SIZE: set the vertical pixels this device will provide, maximum 4096
Reset: If image quality distorts by improper operation, it can be recover
by reset.
GX4
>SPLIT
H TOTAL
V TOTAL
H POS
V POS
>H SIZE
V SIZE
RESET
User Manual
ON
1920
1080
0
0
1920
1080
38