Split; System - RGBlink GX4pro User Manual

MUTE:select ON or OFF
Volume:adjustment range from 0 to 100
Users can also adjust volume without entering AUDIO menu. Rotate the knob anytime the LCD screen shows the
main interface.
AUDIO IN:select the source of the input audio from IMAGE A or IMAGE B
HDMI:select internal or external audio for HMDI input

3.3.7 Split

Image Control One can be used in multiple cascade mode to finish split. When do cascade, connect the signals to
the signal distributor first, and then connect from the outputs of the signal distributor to each input of Image
Control One. User can also do cascade via HDMI LOOP port.
H TOTAL:set the total horizontal pixels of the LED screen, maximum 65535
V TOTAL:set the total vertical pixels of the LED screen, maximum 65535
H POS: select the total number of horizontal screens
V POS: select the total number of vertical screens
H SIZE:set the horizontal pixels this device will provide, maximum 4096
V SIZE: set the vertical pixels this device will provide, maximum 4096
Reset: If image quality distorts by improper operation, it can be recover by reset.
When doing equal splitting, set H SIZE and V SIZE of each device with same resolution, and then set H POS and V
POS of each device correspondingly. When doing unequal splitting, set and save H SIZE and V SIZE of each device
according to actual needs.

3.3.8 System

1. SYSTEM INFO
Show flowing information MCU VERSION,
VIDEO VERSION, EXT VERSION, SN
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
>SPLIT
H TOTAL
V TOTAL
H POS
V POS
>H SIZE
V SIZE
RESET
SYSTEM INFO
TECH SUPPORT
WORK TIME
LOCK FRONT PANEL
ON
1920
1080
0
0
1920
1080
>>
>>
>>
>>
24