Split - RGBlink GX4 Quick Start Manual

Split

GX4 can be used in multiple cascade mode to finish split. When do cascade, connect the signals to the signal
distributor first, and then connect from the outputs of the signal distributor to each input of GX4. User can also
do cascade via HDMI LOOP port.
H TOTAL:set the total horizontal pixels of the LED screen
V TOTAL:set the total vertical pixels of the LED screen
H POS: select the total number of horizontal screens
V POS: select the total number of vertical screens
H SIZE:set the horizontal pixels this device will provide.
V SIZE: set the vertical pixels this device will provide.
Reset: If image quality distorts by improper operation, it can be recover by reset.
When doing equal splitting, set H SIZE and V SIZE of each device with same resolution, and then set H POS and V
POS of each device correspondingly. When doing unequal splitting, set and save H SIZE and V SIZE of each
device according to actual needs.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
>SPLIT
H TOTAL
V TOTAL
H POS
V POS
>H SIZE
V SIZE
RESET
support@rgblink.com
ON
1920
1080
0
0
1920
1080
| www.rgblink.com
18 / 32