Feedback Sheet First Ink Load Procedure - Oce CS9265 Installation Manual

FEEDBACK SHEET FIRST INK LOAD PROCEDURE

Dear customer,
During the first few months after the CS9065-CS9090 launch, we want to collect data of all installations.
During installation, the transition from water-based state to low solvent state is a key procedure, which we want to
monitor for different reasons:
•
Verify proper behaviour of the automatic ink load procedure.
•
Load procedure optimization based on direct field feedback.
To gather information about the ink load procedure and at the same time ensure a proper initial ink load, we require you
to keep track of the different steps of the initial ink load.
To assist you with the progress, we have prepared a feedback sheet, which we would like you to fill in and send back to us.
Please fill in this form and mail/fax it back to our service department
Distributor/Dealer and printer details
Distributor / Dealer
Serial number printer
Date first ink load
Cassette Number
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassette 5
Cassette 6
Cassette 7
Cassette 8
Cassette Number
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassette 5
Cassette 6
Cassette 7
Cassette 8
LOW SOLVENT SETUP CLEANING FIRST WASH
Weight after filling cleaning
gram
gram
gram
gram
gram
gram
gram
gram
LOW SOLVENT CLEANING CASSETTES
Weight after filling cleaning
gram
gram
gram
gram
gram
gram
gram
gram
REMARKS
Weight after filling > 270 gram?
► Intervention with syringe necessary?
NO / YES
NO / YES
NO / YES
NO / YES
NO / YES
NO / YES
NO / YES
NO / YES
Weight after filling > 250 gram?
► Intervention with syringe necessary?
NO / YES
NO / YES
NO / YES
NO / YES
NO / YES
NO / YES
NO / YES
NO / YES
63 AP-40301 – Rev. 2.0 – 02/05/2008