Table of Contents
Advertisement
Step 1 :
Copy the files to your computer's hard disk.
Step 2 :
Power ON the printer in user mode (no diagnostics mode needed).
Step 3 :
Turn OFF all heaters and make sure head height is low in user 1.
Step 4 :
Load media. In order to get the best visible result, we recommend coated media.
Step 5 :
Edit the IP-address in the PRINT.BAT file in Notepad or Ultra-edit 32.
Step 6 :
Drag the file into the PRINT.BAT file. Be sure that the printer is connected to the network.
Step 7 :
A print will be launched.
Step 8 :
Verify if all heads are in one perfect line (3A – 6A and 1B-2B-...-8B).
6A
6A
8B
7B
Notes
•
Use a magnifying glass with a magnification factor of at least 25.
•
Pay attention to the fact that some magnifying glasses give a mirror view.
6B
5B
57
CS9200 Low Solvent series printers
4B
3B
2B
AP-40301 – Rev. 2.0 – 02/05/2008
3A
3A
1B
Advertisement
Table of Contents
