Oce CS9265 Installation Manual page 48

Step 7 : Make measurement settings in following menu:
SetupMenu (1/7) ► MediaSet [F4] ► SheetSize
Menu Choice
F1
F2
F3
Step 8 : Close the front cover.
Step 9 : Start media initialisation.
Menu Choice
F2 Sheet / Roll
F3
F4
ENTER Start media initialization
Step 10 : Media will be measured according to the settings made before.
Step 11 : If the media has been loaded correctly, the following message will be displayed:
Description
Auto Media measurement sequence ► REAR – RIGHT – LEFT – TOP
Media measurement sequence ► RIGHT – LEFT – TOP
Media orientation
Length
Media measurement sequence ► RIGHT – LEFT – TOP
Media orientation
Width
Description
Select which kind of media is loaded
Lever Up Raise the pressure rollers if necessary
User 1-8 Select user profile (1-8)
CS9200 Low Solvent series printers
48 AP-40301 – Rev. 2.0 – 02/05/2008