Table of Contents
Advertisement
4.4.2 Levelling the printer in Y – direction
Step 1 :
Open the front cover.
Step 2 :
Place the level on the print platform.
Step 3 :
Adjust the levelling feet until the printer is completely level.
As for the example below ► higher or lower the left side or lower the right side
Notes
•
Make sure to turn the front or rear feet an equal amount of turns, otherwise the levelling in X direction
was useless.
CS9200 Low Solvent series printers
30
AP-40301 – Rev. 2.0 – 02/05/2008
Advertisement
Table of Contents
