Table of Contents
Advertisement
4.4 LEVELLING THE PRINTER
4.4.1 Levelling the printer in X – direction
Step 1 :
Position the printer on its final position.
Step 2 :
Turn down all feet of the printer stand with an equal pressure until the wheels come off the
ground. Use a fork spanner SW 14.
Step 3 :
Place the level on the right leg and level the printer by adjusting the feet. Do the same at the left
side of the printer.
Step 4 :
The printer is now levelled in X-direction. Go to the next chapter to level the printer in the Y-
direction.
CS9200 Low Solvent series printers
29
AP-40301 – Rev. 2.0 – 02/05/2008
Advertisement
Table of Contents
