6.2 FIRST INK LOAD PROCEDURE
Step 1 :
Power ON the unit.
Step 2 :
The carriage will automatically move to the left side of the
machine. Open the front cover and moisten the rubber sides
of the caps with Solvent Cleaning liquid when asked. This to
optimize the ink loading cycle.
Step 3 :
Close the front cover when done and press the [ENTER] key.
Step 4 :
Please wait.
Step 5 :
Remove dummy cassettes when following message is
displayed.
Step 6 :
Please wait while printer is sucking air.
Step 7 :
Insert 8 NEW cassettes with Low Solvent Setup
Cleaning when following message is displayed.
CS9200 Low Solvent series printers
42
AP-40301 – Rev. 2.0 – 02/05/2008