Table of Contents
Advertisement
8.2 FRONT AND BACK
Purpose of this check
► To check if the heads are all positioned in one line.
Notes
Please note that heads 1 to 4 has been shifted in production 1/720 of an inch (as explained in chapter 8.5)
compared to heads 5 to 8. Which means that you only have to check if head 1, 2, 3 and 4 are in one line
and the same for head 5, 6, 7 and 8!
How to print the file
► Power ON the printer in diagnostics mode ►Adjustment [F2] ►HeadSlant [F4] ►F&B [F2]
Pattern
1B 1B+8A 8A 2B 2B+7A 7A 3B 3B+6A 6A 4B 4B+5A 5A 5B 5B+4A 4A 6B 6B+3A 3A 7B 7B+2A 2A 8B 8B+1A 1A
1B 6B 2B 6B 3B 6B 4B 6B 5B 6B 7B 6B 8B 6B 1B 6B 2B 6B 3B 6B 4B 6B 5B 6B 7B 6B 8B 6B
8A 3A 7A 3A 6A 3A 5A 3A 4A 3A 2A 3A 1A 3A 8A 3A 7A 3A 6A 3A 5A 3A 4A 3A 2A 3A 1A 3A
CS9200 Low Solvent series printers
51
6B is the
reference head
3A is the
reference head
AP-40301 – Rev. 2.0 – 02/05/2008
Advertisement
Table of Contents
