CS9200 Low Solvent series printers
Prints the bi directional test pattern at 300 cps. The
purpose of this print is to check if the heads are still
well adjusted. If necessary, adjust the heads.
Please refer to the maintenance manual for all
necessary information.
Prints the bi directional test pattern at 400 cps. The
purpose of this print is to check if the heads are still
well adjusted. If necessary, adjust the heads.
Please refer to the maintenance manual for all
necessary information.
Prints the bi directional test pattern at 480 cps. The
purpose of this print is to check if the heads are still
well adjusted. If necessary, adjust the heads.
Please refer to the maintenance manual for all
necessary information.
Prints a test pattern to compare the colour settings
of the computer to the print colour of the printer.
This palette is printed in the mode you are currently
working (PrintMode settings).
We recommend to print the palette in 360x360.
60
AP-40301 – Rev. 2.0 – 02/05/2008