Image Settings - Barco BARCOREALITY 6500 Owner's Manual

B.4.4 Image Settings
How to change
The image settings as Contrast, Brightness, Color, Tint, Sharpness, Phase and Gamma can be changed by :
1. moving with the mouse the slide bar up or down
Or ,
clicking on the up or down arrow on the edges of the slide bar. (image B-8)
A value indication for the setting will be given just below the slide bar of the adjustment.
Changing a setting will have inmediate influence on the displayed image.
Image B-8
R5976182 BARCOREALITY 6500 30012001
Downloaded From projector-manual.com Barco Manuals
While changing one off these image settings with the RCU, the values indicated on the image settings web
page will only be changed after 15 min.
B. BARCO Control Manager
97