Network Connection; Audio Connections - Barco BARCOREALITY 6500 Owner's Manual

3. Connections
Available mouse functions.
Left click, right click or double click are the same as for a traditional mouse.
For Click and drag : push for 2 seconds on the left (right) mouse button, then move the mouse arrow with the mouse navigator and
click again very short on the left (right) mouse button to interrupt the drag function.
How to activate ?
To activate this mouse function, handle as follow :
1. Start up your computer with the computer mouse plugged in. The mouse driver should be loaded.
2. Unplug the computer mouse without switching off the computer.
3. Plug the delivered cable between the mouse input of the computer and the mouse output of the projector.
Computer can now be controlled with the executive remote control.

3.6.4 Network Connection

What can be done ?
When the optional network connection is installed, the projector can be connected to a LAN (local area network) (ethernet). Once
installed and connected to the LAN, users are capable of accessing the projector from any location, inside or outside their company
network from a standard web browser. The projector acts as web server and generates a web side with all functions of the projector
listed. Via an internet explorer 4.0 or higher, or a Netscape communicator, the user can insert the correct IP-address of the projector
and access the webpages. Once the webside is accessed, it is possible to check and manipulate all the projector settings. Remote
diagnostics, control and monitoring of the projector can then become a daily and very simple operation. The network connectivity
permits to detect potential errors and consequently improve the time to servicing. For the complete documentation about the use of
the network connection, consult appendix .

3.7 Audio connections

What is available ?
Three audio inputs and one audio output are available. Each audio input can be associated with an input source using the control
software of the projector. e.g. source 1 can be locked with audio input B.
How to lock an audio input ?
Locking an audio input to a source input :
1. Press ENTER to start up the adjustment mode.
2. Press the cursor key ↑ or ↓ to select Random Access.
3. Press ENTER to display the Random Access menu.
4. Press the cursor key ↑ or ↓ to select Audio Tuning.
5. Press ENTER to display the Audio Tuning menu.
6. Press the cursor key ↑ or ↓ to select Video-Audio lock.
7. Press the cursor key ← or → to select the desired source input.
8. Press ENTER to toggle between [A], [B] or [C].
9. Press several times EXIT or ADJUST to return to the operational mode.
26
Downloaded From projector-manual.com Barco Manuals
For more information about the mouse buttons or functions, consult the owner's manual of the Executive
Remote Control.
Before switching off, disconnect first the mouse cable.
See also Video - audio lock, page 57in chapter Random Access adjustment mode.
R5976182 BARCOREALITY 6500 30012001