Table of Contents
Advertisement
7. Random Access
7.5.2 Geometry start up
Start up
1. Push the cursor key ↑ or ↓ to highlight Geometry. (menu 7-42)
2. Press ENTER to select.
The geometry menu will be displayed. (menu 7-43)
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
AUDIO TUNING
GEOMETRY
IEEE 1394
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 7-42
7.5.3 Shift
What can be done ?
The image can be shifted in a horizontal or vertical direction.
How to shift the image ?
1. Push the cursor key ↑ or ↓ to highlight Shift. (menu 7-44)
2. Press ENTER to select.
3. Push the cursor key ↑ or ↓ to shift the image in a vertical direction.
Push the cursor key ← or → to shift the image in a horizontal direction.
Note: The default value for the shift is 0.
Shifting in a vertical direction : when the shift value is positive, the image is shifted upwards, when the value is negative, the
image is shifted downwards.
Shifting in a horizontal direction : when the shift value is positive, the image is shifted to the right, when the value is negative,
the image is shifted to the left.
GEOMETRY
SIDE KEYSTONE
BLANKING
ASPECT RATIO [5:4]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 7-44
7.5.4 Size
What can be done ?
The size can be adjusted in a vertical or horizontal way.
When adjusting the vertical size, The upper side of the image is fixed (table and ceiling mounted configurations) and only the lower
side can be moved to its exact position.
When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position.
58
Downloaded From projector-manual.com Barco Manuals
ASPECT RATIO [5:4]
Select with ↑ or ↓
<EXIT> to return.
Menu 7-43
SHIFT
SIZE
OPTIONS
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
then <ENTER>
R5976182 BARCOREALITY 6500 30012001
Advertisement
Chapters
Table of Contents
