Controlling The Projector - Barco BARCOREALITY 6500 Owner's Manual

How to Program an Address into the RCU?
1. Press the Address key (recessed key on the RCU) with a pencil.
2. Enter the address with the digit buttons within 5 seconds after pushing the address key.
Note: That address can be any digit between 0 and 9.

4.7 Controlling the projector

Input Selection
Key in the corresponding slot number with the digit keys on the RCU. The selected source will be displayed.
Picture Controls
When an image control is pressed, a text box with a bar scale, icon and function name of the control, e.g. 'brightness...' appears on
the screen (only if text is ON). See example screen. The length of the bar scale and the value of the numeric indication indicate the
current memorized setting for this source. The bar scale changes as the control stick on the RCU is pressed or the + or - buttons
on the local keypad.
Brightness
Contrast
Color
Tint
Sharpness
Phase
Freez
Sound Controls
When a sound control is pressed, a text box with a bar scale, icon and function name of the control, e.g. 'volume...' appears on the
screen (only if text is ON). See example screen. The length of the bar scale indicates the current memorized setting for this source.
The bar scale changes as the + or - buttons of the control are pressed. The sound controls can only be adjusted with the RCU.
Volume
Bass
R5976182 BARCOREALITY 6500 30012001
Downloaded From projector-manual.com Barco Manuals
A correct 'brightness' setting is important for good image reproduction.
Use the + button for a higher brightness.
Use the - button for a lower brightness.
A correct 'contrast' setting is important for good image reproduction. Adjust the contrast to the level
you prefer, according to room lighting conditions.
Use the + button for a higher contrast.
Use the - button for lower contrast.
Color saturation is only active for Video and S-Video. Adjust the color intensity of the picture.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint is only active for Video and S-Video when using the NTSC 4.43 or NTSC 3.58 system.
Use the + button
Use the - button.
Use the + button for a sharper picture.
Use the - button for a softer picture.
Use the + or - button to adjust the phase.
Press Freez to freeze the displayed image.
Volume control adjusts the volume.
Use the + button for a higher volume.
Use the - button for a lower volume.
Bass control adjusts the bass level (low tones).
Use the + button for more low tones.
Use the - button for less low tones.
4. Getting Started
35