Using The Rcu; Pointing The Rcu Via The Screen To The Ir Sensor - Barco BARCOREALITY 6500 Owner's Manual

4. Getting Started
How to change ?
1. Press ENTER to start up the adjustment mode. (menu 4-1)
2. Push the cursor key ↑ or ↓ to highlight Installation.
3. Press ENTER to select. (menu 4-2)
4. Push the cursor key ↑ or ↓ to highlight OSD color.
5. Press ENTER to select.
The OSD color menu will be displayed. (menu 4-3)
6. Push the cursor key ↑ or ↓ to highlight the desired color.
7. Press ENTER to activate.
ADJUSTMENT MODE
Select a path from below :
AUTO IMAGE
RANDOM ACCESS
INSTALLATION
Source 01
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 4-1

4.5 Using the RCU

Pointing to the reflective screen
1. Point the front of the RCU to the reflective screen surface. (image 4-6)
Image 4-6

Pointing the RCU via the screen to the Ir sensor

32
Downloaded From projector-manual.com Barco Manuals
800 PERIPHERALS
INTERNAL PATTERNS
SERVICE SWITCHING MODE : [BLANKING]
Select with ↑ or ↓
<EXIT> to return.
Menu 4-2
INSTALLATION
CONFIGURATION
OSD COLOR
SHUTTER
more ...
then <ENTER>
Menu 4-3
OSD COLOR
HIGHTLIGHTED ITEM
RED
GREEN
YELLOW
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
R5976182 BARCOREALITY 6500 30012001