Table of Contents
Advertisement
Image B-18
Settings screen
Projector name set up
1. Click in the projector name text field.
2. Fill out the projector nick name.
Use the format : name@domain
3. Click on apply to add the projector name to the general start up screen.
Projector location set up
1. Click in the location text field.
2. Fill out the location.
3. Click on apply to add the location to the general start up screen.
IP address SMPT server set up
1. Click in the SMTP server text field.
2. Fill out the IP address for the SMTP server (e-mail server).
B.5.6 Source
What can be done
The source screen allows to enter a name or nick name for each slot. These names will be visible on the Control Source screen.
R5976182 BARCOREALITY 6500 30012001
Downloaded From projector-manual.com Barco Manuals
SMTP
Simple Mail Transfert Protocol. A protocol used to move internet E-mail between systems.
B. BARCO Control Manager
107
Advertisement
Chapters
Table of Contents
