Barco BARCOREALITY 6500 Owner's Manual page 25

Connector name
Component Video - SS
Component Video - SOY
How to select slot 1
1. Press key 1 on the RCU or the local keypad.
Configuring the 5-cable input.
The configuration has to be done on the Input Slot menu. To change the signal format :
1. Press ADJUST or ENTER key to start up the Adjustment mode. (menu 3-4)
2. Push the cursor keys to select Installation.
3. Press the cursor keys to select Input Slots. (menu 3-5)
4. Press ENTER.
The internal system will scan the inputs and displays the result in the Input Slots menu. (menu 3-6)
5. Push the cursor keys to select the first slot menu 3-4.
6. Press ENTER to toggle the input signal priority.
ADJUSTMENT MODE
Select a path from below :
AUTO IMAGE
RANDOM ACCESS
INSTALLATION
Source 01
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 3-4
Possible indications on the input slot menu.
• RGB [HS&VS] = RGB analog signals, separate sync is horizontal and vertical sync.
• RGB CS = RGB analog signals, separate sync is composite sync.
• RGB CV = RGB analog signals, separate sync is composite video or tri-level sync.
• RGB-SOG = RGB analog signals, sync on green is composite sync.
• COMPONENT VIDEO - CS = separate sync is composite sync.
• COMPONENT VIDEO = component video with composite sync on Y or composite tri-level sync on Y.
• VIDEO
• S-VIDEO
Audio Connection
Connect the audio input to one of the 3 audio inputs.
See Video - audio lock, page 57
R5976182 BARCOREALITY 6500 30012001
Downloaded From projector-manual.com Barco Manuals
TEXT BOX POSITION
SERVICE QUICK ACCESS KEYS
NETWORK CONFIGURATION
Select with ↑ or ↓
<EXIT> to return.
Menu 3-5
When using an RCVDS 05 with a 5 cable output module, connect these 5 cables to this 5-cable input slot (slot1)
of the projector. All sources of the RCVDS can now be accepted by the projector.
R
R-Y
R-Y
INSTALLATION
INPUT SLOTS SLOT SELECTOR [Automatic]
NO SIGNAL
LENS x 1. RGB [HV&VS]
- 2. RGB [HV&VS]
- 3. VIDEO
START UP MODE - 4. S-VIDEO
- 5. DIGITAL INPUT
more ... - 6. IEEE 1394
then <ENTER>
Menu 3-6
G B H
Y B-Y S
-
Ys B-Y
INPUT SLOTS
Select with ↑ or ↓
<ENTER> to toggle
<EXIT> to return.
3. Connections
V
-
-
21