Change Baudrate Pc; Reset Lamp Runtime; Lamp Run Time History - Barco BARCOREALITY 6500 Owner's Manual

9.7 Change Baudrate PC

Start Up
1. Push the cursor key ↑ or ↓ to highlight Change Baudrate PC. (menu 9-14)
2. Press ENTER to display the Change Baudrate PC menu. (menu 9-15)
The actual baudrate will be highlighed.
The following baud rates are available : 230400/115200/57600/38400/19200/9600/4800/1200
3. Push the cursor key ↑ or ↓ to higlight the desired baudrate.
4. Press ENTER to select.
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC

RESET LAMP RUNTIME

LAMP RUNTIME HISTORY
LAMP DIMMING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-14
9.8 Reset Lamp Runtime
When is it allowed?
Reset lamp run time is only allowed when a new lamp is installed.
Start up
1. Push the cursor key ↑ or ↓ to highlight Reset Lamp Run Time. (menu 9-16)
2. Press ENTER.
The following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified service personnel. If you are not qualified, press EXIT to
cancel the reset operation. (menu 9-17)
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-16

9.9 Lamp Run time History

What can be done?
Getting an overview of the different lamp run times
R5976182 BARCOREALITY 6500 30012001
Downloaded From projector-manual.com Barco Manuals
SERVICE CHANGE BAUDRATE PC
MORE...
Select with ↑ or ↓
<EXIT> to return.
Menu 9-15
SERVICE
---------------------
ELECTRICAL SHOCK
---------------------
RESET LAMP RUN TIME
MORE... service personnel
<ENTER> to accept
<EXIT> to return
Menu 9-17
230400
115200
57600
38400
19200
9600
4800
1200
then <ENTER>
WARNING
RISK OF
is reserved to
qualified
9. Service mode
81