Edit File - Barco BARCOREALITY 6500 Owner's Manual

7. Random Access
Changing the filter setting
1. Push the cursor key ↑ or ↓ highlight filter list.
2. Press ENTER to toggle the annotation between brackets.
[All] : all files that can be loaded will be displayed.
[Fit] : only the best fitting files will be displayed (with a distinction of ± 2 lines and line duration of ± 300 ns, if nothing is found
within this small area, the projector continues searching until it finds something).
How to load a file ?
1. Push the cursor key ↑ or ↓ to select the best fitting file. (menu 7-5)
2. Press ENTER to select.
A confirm Load file menu will be displayed with the newly created file and the one on which the new file is based on. (menu 7-6)
3. Press ENTER to confirm the new creation or EXIT to return to the load file menu.
LOAD FILE
FILTER LIST [All]
Filename
video525.s01 1
video525.c01 1
video525.c02 1
----------------------------
Active file : Video525.c50
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return.
Menu 7-5
The image is not perfect ?
If the displayed image is not correct after selecting the best fitting file, go to the Edit menu, select the active file and change the File
settings.

7.2.5 Edit file

The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult
the source specification before entering the data.
• Start up
• Changing the settings
• Correct value
44
Downloaded From projector-manual.com Barco Manuals
Scr resolution
675x240i Video525.c02
675x240i based on file
675x240i Video525.s01?
<ENTER> to return
<EXIT> to return.
Menu 7-6
During a load file, the actual file is displayed next to the indication Active file.
When scrolling through the files, the image will be adapted according to the settings of the selected file ( on
line adaptation.
CONFIRM
LOAD FILE
create file
R5976182 BARCOREALITY 6500 30012001