Osd Color; Internal Patterns - Barco BARCOREALITY 6500 Owner's Manual

8. Installation mode
Set up the Correct Configuration
1. Push the cursor key ↑ or ↓ to highlight Configuration. (menu 8-30)
2. Press ENTER to select.
The configuration menu will be displayed.
INSTALLATION
800 PERIPHERALS
CONFIGURATION

OSD COLOR

INTERNAL PATTERNS

SWITCHING MODE : [BLANKING]
more ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-30
8.12 OSD Color
What can be done?
The highlighted items on the menus can be displayed in red, green or yellow.
How to change this color setting?
1. Push the cursor key ↑ or ↓ to highlight OSD Color. (menu 8-31)
2. Press ENTER to select.
The OSD color menu will be displayed. (menu 8-32)
3. Push the cursor key ↑ or ↓ to highlight a color.
4. Press ENTER to select.
INSTALLATION
800 PERIPHERALS
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE : [BLANKING]
more ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-31
8.13 Internal Patterns
What can be done with these internal patterns?
The projector is equipped with different internal patterns which can be used for measurment purposes.
74
Downloaded From projector-manual.com Barco Manuals
SHUTTER
For more information, see Configuration, page 10.
HIGHTLIGHTED ITEM
SHUTTER
Select with ↑ or ↓
<EXIT> to return.
Menu 8-32
OSD COLOR
RED
GREEN
YELLOW
then <ENTER>
R5976182 BARCOREALITY 6500 30012001