Table of Contents
Advertisement
6. Auto Image Adjustment
6.3 Action
What can be done ?
The action function can be toggled between :
•
full automatic : the best fitting file will be loaded automatically when a source is selected. At the same time the image will be
automatically centered on the active surface of the LCD.
•
on new file : only on a new file, the image will be centered on the active surface of the LCD.
•
manual : the auto image function is switched OFF, no centering, no file load.
When is it disabled ?
The centering of the image will be disabled when :
•
The black edges of the image take more than 25% of the complete image.
•
The connected source is video, s-video, digital video or HDTV.
•
Custom file already exists.
Set up
To set up the Action function :
1. Push the cursor key ↑ or ↓ to highlight Action. (menu 6-4)
2. Press ENTER to toggle between Full automatic, New File or Manual.
Note: The values of automatically adjusted sources will not be saved.
AUTO IMAGE
ACTION : FULL AUTOMATIC
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 6-4
40
Downloaded From projector-manual.com Barco Manuals
ADJUST
R5976182 BARCOREALITY 6500 30012001
Advertisement
Chapters
Table of Contents
