Lens Installation; Cleaning The Lens - Barco BARCOREALITY 6500 Owner's Manual

2.3.4 Lens installation

How to install ?
Follow the next procedure :
1. Open the lens cover of the projector by pivoting it up and take it off. (image 2-2)
2. Pull the lens locks levers backwards to open the lens locks. (image 2-3)
3. Put the lens on the lens holder. (image 2-4)
4. Push the lens locks back in position and lock the levers.
5. Plug the wires of the motor unit into the connector (image 2-5)
6. Re-install the lens cover.
Image 2-2
Image 2-4

2.3.5 Cleaning the lens

R5976182 BARCOREALITY 6500 30012001
Downloaded From projector-manual.com Barco Manuals
The procedure for the mounting of a Scheimpflug lens is different.
Refer to the installation manual of the lens.
To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have de-
veloped recommendations for cleaning the lens. FIRST, we recommend you try to remove any material from
the lens by blowing it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Image 2-3
Image 2-5
2. Installation Guidelines
13