Source; General Control Screen; Source Selection - Barco BARCOREALITY 6500 Owner's Manual

B. BARCO Control Manager
How to select
1. Click on one of the buttons on the content pane.
The indicated function can be swithed on or off. When the green light in the button lights up, the function is on image B-6.
Image B-6

General control screen

B.4.3 Source
How to select
1. Click on one of the buttons on the content pane.
The indicated source is selected. The green light in the buttom lights up to indicate that this source is selectedimage B-7. When
there is no signal on the selected slot, the projector returns to previous displayed source.
The source names next to the slot indications can be freely chosen. To enter or to change these names, go to 'Configuration'
and select item 'Source'Source, page 107. (image B-7)
Image B-7

Source selection

96
Downloaded From projector-manual.com Barco Manuals
R5976182 BARCOREALITY 6500 30012001