Barco BARCOREALITY 6500 Owner's Manual page 19

Image 2-6
Image 2-7
R5976182 BARCOREALITY 6500 30012001
Downloaded From projector-manual.com Barco Manuals
Note, only important if more than one projector is installed in the room.
The common address can be zero (0) or one (1). The standard RCU are setup for common address zero. To
change the common address of the RCU, contact a BARCO service center. If it is necessary to program the
projector address into the RCU, see chapter 'Getting Started'.
Projector address has to be reprogrammed every time the battery is changed, the RCU will always switch to
the default address.
2. Installation Guidelines
15