Switching Mode - Barco BARCOREALITY 6500 Owner's Manual

Available patterns
- Outline
- Hatch
- Color bars
- Multiburst
- Checker board
- Page Char
- Alpha numeric char
- Character sets
- Backgrounds
How to select an internal patterns?
1. Push the cursor key ↑ or ↓ to highlight Internal Patterns. (menu 8-33)
2. Press ENTER to select.
The internal patterns menu will be displayed. (menu 8-34)
INSTALLATION
800 PERIPHERALS
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE : [BLANKING]
more ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-33

8.14 Switching Mode

What can be set up with the switching mode?
When switching from one source to another, the time between the switch off of the first source and the upcoming new source can
be filled up with a blank image or with a freeze of the last projected image.
How to install the switching mode?
To install the switching mode, follow the next procedure :
1. Push the cursor key ↑ or ↓ to highlight Switching mode. (menu 8-35)
2. Press ENTER to select.
The switching mode menu will be displayed. (menu 8-36)
3. Select 'Switching' and press ENTER to toggle between [blanking] or [freeze].
blanking
freeze
INSTALLATION
800 PERIPHERALS
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE : [BLANKING]
more ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-35
R5976182 BARCOREALITY 6500 30012001
Downloaded From projector-manual.com Barco Manuals
INTERNAL PATTERNS
SHUTTER
ALPHA NUMERIC CHAR
Select with ↑ or ↓
<EXIT> to return.
Menu 8-34
by switching from one source to another the image will be blanked out and the installed color in the item
'No Signal' will be displayed.
by switching from one source to another the last projected image will be frozen until the new source is
displayed.
SWITHCHING: [BLANKING]
SHUTTER
Select with ↑ or ↓
<EXIT> to return.
Menu 8-36
OUTLINE
HATCH
COLOR BARS
MULTIBURST
CHECKER BOARD
PAGE CHAR
CHARACTER SETS
BACKGROUNDS
then <ENTER>
SWITCHING MODE
then <ENTER>
8. Installation mode
75