Setting Unit Of Temperature Measurement; Programming The Clock; Timer - Piazzetta Sabrina Instructions For Installation, Use And Maintenance Manual

6.5 SETTING UNIT OF TEMPERATURE MEASUREMENT

This function allows the unit of temperature measurement in CELSIUS or in FAHRENHEIT to be set on the display.
Selecting the UNIT OF MEASUREMENT menu.
Press the MENU button, use the MENU SELECTION button to select the UNIT OF
MEASUREMENT menu and the SET button to confirm.
Selecting the unit of temperature measurement.
Scroll with the MENU SELECTION button to find the required unit of temperature ("F"
Fahrenheit or "C" Celsius) and confirm with the SET button.
After confirmation the readout FUNCTION ENABLED appears on the display, which then
automatically returns to the initial readout.

6.6 PROGRAMMING ThE CLOCk

Correct time setting is necessary to be able to use all the functions where time is involved.
Setting the clock entails programming the following values: day, hour and minutes.
These values are displayed in sequence upon pressing the SET key.
Press key 6 for a few seconds. Use key 5 or 6 to scroll the menu that appears on the
display until the scrolling readout SET CLOCK appears.
Confirm by pressing the SET key.
Using key 1 or 2, scroll the hours of the day that appear on the display until the required
hour appears.
Confirm by pressing the SET key.
Using key 1 or 2, scroll the minutes of the day that appear on the display until the
required minutes appear.
Confirm by pressing the SET key.
Using key 1 or 2, scroll the days of the week that appear on the display until the
required day appears.
Confirm by pressing the SET key.
The display automatically returns to its initial status.

6.7 TIMER

The timer allows the user to programme the stove to start up and shut down automatically without any manual intervention.
Daily, weekly and weekend programmes can be selected with a maximum of two operating cycles in two separate timetable bands.
For example: Cycle 1: from 6 am until 9 am.
Cycle 2: from 8.30 pm until 11 pm.
• In the DAILY programme the two timetable bands once established can be activated or deactivated for all the days of the week.
For example: if you want the stove to operate from 6 am to 9 am every day.
• In the WEEKLY programme the two timetable bands once established can be activated or deactivated for each day.
For example: if you want the stove to operate from 6 am to 9 am on Monday, Tuesday, but not on Wednesday, and so on.
• In the WEEKEND programme the two timetable bands once established can be activated or deactivated for Friday, Saturday and Sunday.
For example: if you want the stove to operate from 6 am to 9 am on Friday, Saturday, but not on Sunday.
26
Description of activity
Description of activity
H07029330 / DT2001081 – 02
Display
UNIT OF MEASUREMENT
F UNIT OF
MEASUREMENT
FUNCTION ENABLED
Display
SET CLOCK
MO DAY
10: HOURS
:32 MINUTES
10:32 oFF
DT2012660-00
DT2011643-00
DT2011653-00